HOME CB TECHNOLOGY NEWSLETTER F.A.Q ABOUT CB SiteMap

[HOT] Asymmetric Mountain bike 29er AM&DH hookless rim 35mm wide

Price(USD/PCS)

$160.00-185.00

Use

AM/DH

Size

29ER

Material

full carbon Toray T700

Type

Asymmetric hookless beadless

Weight

AM:400+/-15g DH:450+/-15g

Tubeless

compatible

Spoke Hole

28H/32H/36H

Internal hole

customized

ERD

589mm

Inner width

29.00mm

Outer width

35.00mm

Depth

25.00mm

Max weight limit

150kg

Max spoke tension

200kgf

Max tyre pressure

40psi

Cycling tyre pressure

according to road situation

Finish

matte/glossy

Decal

customized

Weave

UD/3K/12K

Warranty

1 Year

Standard

En Standard

Lead time

10-15 working days

Item No

BAMDH293525MRCSA

While the rims are optimized for a tubeless setup with the addition of tubeless tape, they also work with tubes.

The profile allows for equalized spoke tension which creates a stronger wheel that stays true.

Carbon fiber flows continuously over the bead area to provide the best impact resistance and a significant strength increase compared to a clincher rim.

Constructed with premium Toray T700 carbon fiber. The best strength to weight ratio with no expense spared.

Asymmetric Mountain bike 29er AM hookless rim 35mm wide CARBONBICYCLE rims angled drilling

Asymmetric Mountain bike 29er AM hookless rim 35mm wide

Another 27.5er(650B) Asymmetric Mountain bike rims ,35mm wide and depth: 25mm

Customer Review

2017-11-01

Mark:

Looking for a set of times for aggressive trail riding. Which is the stronger rim, your 32e/26i or 35e/29i rim?

2017-11-01

Support :

Hi, Mark,

35e/29i is stronger than 32e/26i.

This one is OK for you?

2017-10-24

andrea:

I already bought 4 rims of this model and still riding without any problem. last couple of rims you shipped me the weight it was 390 gr. Can you make me again this weight min 380 / max 390 each ? i need other 2 rims.

2017-10-24

Support :

Andrea,

Nice to hear from you again.

Sure, we can make it with weight min 380 / max 390 each.

You can order them when you confirm the order.

Tks,

2016-11-25

larry:

using 2.3 size tires doing xc and trail riding would u reccomend these rims or the 33 or 32 wide rim? and can you please quote a wheelbuild using dt350 with updated 36 ratchet system. 32 hole jbend 15mm front 10x135 qr in rear. do you reccomend alloy or brass nipples? shipped to us, valve stems thanks Larry

2016-11-25

Support :

Hi, Larry,

Thanks for your inquiry.

If you will do trail riding, we think our 32mm wide rim is better.

Regarding the hub you want, we have only DT240 with 36 ratchet system and J-bend hole in stock, and it will be a little bit more expensive than DT350.

Regarding the nipples, alloy nipple is lighter, brass nipple is heavier and stronger, it is depend on your decision.

Best regards,

2016-05-02

jim:

Sorry another question do i read that righ that you have novatech D712SB/D711 (rear/front) with boost (12*148mm and 110*15mm) when building wheels? thx

2016-05-02

Support :

Hi,

Yes, we have can build the wheels with Novatec boost hub, the lead time is about 15 days.

2016-05-01

jim:

How comes this rim (29mm inner) is 20gr lighter than the otherwise same rim you offer with 26mm inner width?

2016-05-01

Support :

Hi, Jim,

Thanks for your inquiry.

The 35mm/29mm width asymmetric rims are our lighter serie rims because we adopt different procedure in producing, they are designed for the customers who want lighter weight.

pls feel free to ask us if you have any questions.

Regards,

2016-03-21

Bill Green:

Can you quote a price for the 29" Asymmetrical rim 35/29 built up with DT Swiss 350 hubs, prefer straight pull (15/100 F- 12/142 R). Do you have these hubs available? If not, can they be built up with novatec and what is that price? Thanks, Bill

2016-03-21

Support :

Hi, Bill,

Thank you for your inquiry.

Regarding the mtb DT 350 hubs, we only have DT350 straight pull (15/100 F- 12/142 R) with 28 holes, J bend(15/100 F- 12/142 R) with 32 holes in stock at present, both color are black.

-Rims: Asymmetric Hookless 29" 35mm AM rim
-Hubs: DT Swiss 350 hubs front 15*100 Thru Axle/rear12*142 Thru Axle (for Shimano 11s or SRAM XX1?);
-Spokes: Pillar Aero X-TRA 1420;
-Nipples: Pillar brass nipple;
the wheels price will be $778/set, and the shipping cost to USA is $78.

Regards,

2016-03-10

Spirulina:

How much would it cost to build a set if I send you the hubs? With Pillar Aero X-TRA 1420 spokes and brass nipples (32 spokes per wheel)

2016-03-10

Support :

Hi, Spirulina,

Thank you for your inquiry.

The cost to build a wheelset with your own hubs will be $ 580, and the shipping cost to USA is $78.

But we suggest that you only buy rims from us and assembly them at your local bike shop.

Regards,

2016-03-09

Stephen Thompson:

I would like to get a quote on a set of these rims built up as wheels with either Hope or DT Swiss 350 hubs, centerlock, 142 rear, with your recommended spokes and brass nipples. No stickers, or black. Shipped to Idaho, US. Thank you! Steve

2016-03-09

Support :

Hi, Stephen,

Thank you for your inquiry.

We only have two kinds of mtb Dt swiss 350 hubs in stock at present,they are (pull straight, 28 holes) and (J-bend,32 holes), both are black.

-Rims: Asymmetric Hookless 29" 35mm AM rim;( 28H or 32H ?)

-Hubs: DT Swiss 350 hubs front 15*100 Thru Axle/rear12*142 Thru Axle ( for Shimano 11s or SRAM XX1?)

-Spokes: Pillar Aero X-TRA 1420;

-Nipples: Pillar brass nipple;

Price :$778/set, shipping cost to USA is $78;

We accept Paypal ([email protected]) usually.

Regards,

CB

2016-02-19

joey elms:

Hello I ride all mountain enduro style some what aggressive and weight 240lb was wondering which 29er wheel you would recommend and what size tire should I run on that wheel Thank you

2016-02-19

Support :

Hi, Joey,

Thank you for your inquiry.

This asymmetric rim should be reinforced in your situation.

tire size: 2.2-2.5"

Regards,

2016-02-06

Griffin:

Do these have angled spoke holes?

2016-02-06

Support :

Hi, Griffin,

Thank you for your inquiry.

Yes, the asymmetric rims' spoke holes are all angled drilled (about +/-6 degree).

Regards,

2016-01-23

terrie :

What is price for these assymetric 35mm 29er rims as wheelset novatec D771 15mm front D772 142 rear with xd built light for xc. Thanks Terrie

2016-01-23

Support :

Hi, Terrie,
Thank you for your inquiry.
-Rims: Asymmetric Hookless 29" 35mm AM rim, 28H or 32H;
-Hubs: Novatec D771SB 15mm Thru Axle/Novatec D772SB 12*142 Thru Axle; Sram xx1 -11s (XD)
-Spokes: Pillar Aero X-TRA 1420;
-Nipples: Pillar alloy nipple;
Price :$678/set, shipping cost to USA is $78;
Regards,
CB

2015-12-15

Keith:

Do you offer this in a 24 Hole drilling? (CBRM29AH02)

2015-12-15

Support :

Hi, Keith,

Thank you for your inquiry.

yes, we can offer CBRM29AH02 with 24H which is not popular,

We add the option for it now, so you can order it directly on the page.

Regards,

2015-12-12

Mark M:

Are the spoke holes drilled at an angle? Are the spoke holes offset (alternating so each is closer to the corresponding flange?)

2015-12-12

Support :

Hi, Mark,

Thank you for your inquiry.

Regarding the spoke holes, we are using +/-6 degree angle drilling, pls see the attached picture.

If you have special demand for external holes, our technicians will try to meet you.

Regards,

2015-11-22

Juan :

I'm interested in the 35/29 asymmetric rims in 29". Do you have these in stock or is there a wait time?

2015-11-22

Support :

Hi, Juan,

Thank you for your inquiry.

Regarding the CBRM29AH02 rim, there is a wait time, the delivery time is about 14 days.

Regards,

2015-10-30

Bernhard Schmidt:

Hi, can you confirm 400g for an UD matt 28h Rim? Is it able to pick up Rims with selected weight? What is your price for 2 Rims with shipping to Switzerland? Thanks and greetings from Switzerland

2015-10-30

Support :

Hi, Bernhard,

Thank you for your inquiry.

We are sure that the weight of the rim (Asymmetric Mountain bike 29er AM hookless rim 35mm wide) is 400+/-15g, and we can produce the rim with the weight you demand if you want to add the weight (noted in the order).

you can order the rims directly on the webpage, and 2 rims shipping to Switzerland is 426.1$.

Pls feel free to ask us if you have any question.

Regards,